1
0
LED DISPLAY
When the refrigerator is
powered on, for three (3) seconds the display
will show all temp. indicators and then display the current temp. setting.
This display will also be used to display error codes if a fault should
occur (refer to Page 1
6
).
REFRIGERATOR TEMP. SETTING
Locate the temp. control panel (refer to item 7 on Page 6) and repeatedly
press the SET Button (refer to Button A on Page
9
) to cycle through the
temp. settings. Each press of the SET Button (A) will increase the temp.
setting by one (1). When the maximum temp. setting has been reached,
pressing the SET Button again, will return the temp. setting to the
minimum setting (Temp. Setting 1).
FREEZER TEMP. SETTING
Locate the Freezer Temp. control at the rear of the
freezer section. Turn the dial to adjust the temp.
setting between C
old
(minimum) and C
older
(maximum).
Note: It is recommended to keep the dial in
the central position for normal operation and avoid set to
Colder (maximum) position for an extended period of time.
ICE MAKING
To make ice cubes, fill the twist Ice tray with clean drinking water and
place
back to
the
twist ice maker in
freezer section.
To remove the cubes from the tray, twist the
t
wist Ice
tray
to invert the
tray. The ice cubes will fall into the container below. Be careful opening
and closing the freezer door until the ice cubes are completely frozen to
avoid spilling water.
ENERGY SAVING TIPS
Adjust the temperature control to a setting that is acceptable for the
storage of the food. This will reduce the power consumption.
Only open the door when required and ensure all doors are closed
securely. Frequently opening or doors left open will increase power
consumption. To maintain good air circulation, keep the shelves and
crisper of the refrigerator as supplied, and do not block air outlets.
CAUTION