TECO MOTOVARIO PBH Series, Instructions For Installation, Use And Maintenance Manual

Page: 12 / 56

5. SAFETY INFORMATION
Carefully read the content of this manual and any instructions reported directly on the plates applied to the gear reducer.
The personnel working on the gear reducer must have specific technical expertise, experience and skills, as well both the
necessary work tools and PPE (in accordance with current applicable laws). Failure to comply with these requirements
may affect the health and safety of people.
Only use the gear reducer for the purposes permitted by Motovario. Incorrect use poses a risk to the health and safety of
people, as well economic damage. Always keep the gear reducer in good working order by carrying out the required
maintenance. The gear reducer is can become very hot. Avoid touching the surface with bare hands and ensure the
necessary safety protections are in place.
Ensure maintenance is carried out in safe conditions, with the help of protective clothing and/or equipment, in
accordance with current laws on safety in the workplace.
Only use original Motovario spare parts for replacements. Only use oils and greases recommended by Motovario. Do not
discard polluting material into the environment and ensure disposal is carried out in compliance with current applicable
laws. After replacing the lubricant, clean the surface of the gear reducer, as well as the area where the work was carried
out.
MHD reducers
QL0336
∕
REV.2
Instructions for installation, use and maintenance
10