TECO FM50101-X, Instructions & User'S Manual

Page: 24 / 68

CONNECTION
Circuit Diagram
FM50 NEMA 4X (IP65 Indoor Duty) with operators (115V, 230V, 1/4 - 1HP models)
NOTE :
1. Power switch, REV-0-FWD switch and potentiometer are only for NEMA 4X units with operator devices.
2. Power supply cable: #14 AWG (2.0mm
2 )
3. Motor cable: #16 AWG (1.25mm 2 )
4. Tightening torque value for terminals:
(1). Power/Motor cable (plug-in) terminal: 4.34in-lb (5kg-cm)
(2). Remote control wire: 3.47in-lb (4kg-cm)
(3). Outer cover (M4): 5.20in-lb (6kg-cm)
5. Input source: single-phase (L1, L2, ), make sure that it is connected to the appropriate power supply.
6. Output motor: three-phase ( , T1, T2, T3)
CAUTION
- Do not start or stop the AC drive using the main circuit power.
- NEMA 4X with operators: Always maintain REV-0-FWD switch at 0 position.This will ensure that the AC drive is stopped
before power up after power supply interruption. Otherwise, injury may result to personnel.
24
FLUXMASTER 50 INSTRUCTION MANUAL