TECO-Westinghouse Motor MA7200, Instruction Manual

Page: 118 / 153

3-78
Parameter
No.
Name
LCD display
(English)
Unit Description
Multi-function
Analog Output Level
Un-13
Amount of PG Speed
Feedback
Un-13= 100.0%
PG Feedback.
0.1% 100.0%=MAX. output frequency
10V/MAX. Output
Frequency
Un-14
Amount of PG Speed
Compen.
Un-14= 100.0%
PG Compen.
0.1% 100.0%=MAX. output freq.
10V/MAX. Output
Frequency
Un-15 PID Control Input
Un-15= 100%
PID Input
0.1% 100.0%=MAX. output freq.
10V/Max. output
frequency
Un-16 PID Control Output 1
Un-16= 100%
PID Output1
0.1% 100.0%=MAX. output freq.
10V/Max. output
frequency
Un-17 PID Control Output 2
Un-17= 00%
PID Output2
0.1% 100.0%=MAX. output freq.
10V/Max. output
frequency
Un-18 Fault Message 1
Overcurrent
Message1
－
Fault message occurred now
－
Un-19 Fault Message 2
Overcurrent
Message2
－
Fault message occurred
last time
－
Un-20 Fault Message 3
Overheat
Message3
－
Fault message occurred
last two time
－
Un-21 Fault Message 4
Overtorque
Message4
－
Fault message occurred
last three time
－
Un-22
The Parameter Of
Time Period Between
Last Fault And The
Nearest Fault.
Un-22= 2400Hr
Last Fault Run Time 1Hr
The value of ‘Run Elapse Time’
parameter will be cleared after fault
has been cleared.
－
Un-23
Frequency Command
While Fault Occurred
Un-23= 60.00Hz
Last Fault Freq.Cmd.
0.01Hz
－ －
Un-24
Output Freq. While
Fault Occurred
Un-24= 60.00Hz
Last Fault O/P Freq.
0.01Hz
－ －
Un-25
Output Current While
Fault Occurred
Un-25= 12.5A
Last Fault O/P I
0.1A
－ －
Un-26
Output Voltage While
Fault Occurred
Un-26= 220.0V
Last Fault O/P V
0.1V
－ －
Un-27
DC Voltage While
Fault Occurred
Un-27= 310.0V
Last Fault O/P V
0.1V
－ －
Un-28
I/P Terminal Status
While Fault Occurred
Un-28= 00000000
Last Fault I/P Term.
－
Same as Un-11,
display terminal status
－
Un-29
O/P Terminal Status
While Fault Occurred
Un-29= 00000000
Last Fault O/P Term.
－
Same as Un-12,
display terminal status
－
Un-30
Time Elapsed After
Power-On
Un-31= 00002Hr
P Elapsed Time
1Hr
Display total time elapsed
after power ON
－
Un-31
Time Elapsed After
Run
Un-31= 00002Hr
R Elapsed Time
1Hr
Display total time elapsed
after pressing RUN
－
Un-32
EPROM S/W
Version
Un-32= 00001
Soft Number
－
-Manufacturing use-
－
Un-33
Feedback
Motor Speed
Un-33= 00000rpm
Motor Speed
1rpm
Display motor speed while PG
feedback is set. 10V/MAX. Motor
Speed
Un-34
PID Feedback Display
*1
Un-34= 00000
PID Feedback
1*2 Displays PID feedback signal
*1. The parameters are available for 74.03 and later software version only.
*2. The unit can be changed through parameter Cn-28 and Sn-70.