Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
18
The Controlled Mechanical Ventilation system with passive cross-flow heat recovery uses the
best available technology in terms of components and construction solutions.
It was designed for indoor suspended ceiling applications and features two EC brushless fans.
The filtering section is incorporated in the machine and the filter can be removed by side access.
The hydraulic connection features a condensation discharge, which must include a single siphon
lower than the level of the machine.
Fan operation allows air change in the rooms, recovering the energy of return air before release
to the outside.
In Free-Cooling mode, namely by acting on the By-Pass damper, external fresh air is allowed to
enter directly into the environment along a path with low flow loss, bringing electricity consumption
to the minimum possible; of course, this function is suitable only if external conditions allow it.
INTRODUCTION
Read the User Manual carefully before using and installing the recuperator.
Installation and operation of the recuperator must be carried out in accordance with the User
Manual, as well as the provisions of local and national laws and regulations, and applicable
technical and electrical standards.
Warnings contained in the User Manual must be carefully considered as they contain vital
information for personal safety.
Failure to comply with safety regulations may result in injury or damage to the recuperator.
Read the Manual carefully and keep it for as long as the recuperator is used.
When the recuperator is transferred to another user, the User Manual must be transferred as well.
Key to symbols used in the manual:
SAFETY REQUIREMENTS
WARNING
PROHIBITION
