SD memory card folder and file
1.
Set up folder
- The required setup files are saved for the SECU-EYE main system.
2.
Video folder
- The video data will be saved on the folder by the time (based on GMT).
- Folder name: Date_Time (DYYYYMMDD_HH)
ex) 2009.03.15. 08:30AM
à
D20090315_08
3.
Video file (based on GMT)
- The video file will be saved by one minute unit.
- File name : Date_HrMinSec.extension
(YYYYMMDD_HHMMSS.esf/YYYYMMDD_HHMMSS.sub
ex) OUT camera (forward side) : 20090303_083040.esf
IN camera (rear side) : 20090303_083040.sub
When the SD memory capacity is full?
1.
Delete the saved video file in following way and make the memory space automatically:
Delete the oldest files on the SD memory card. (First In First Out method).
Keep the event folder files.
2.
Delete the empty video folders.
△
Old video data can be deleted automatically when the memory space is full without any notice.
So keep the important data on the other storage media like CD/HDD, etc……
Remove the SD memory card
1.
Turn off the system main power button.
(The system power can be turned off during the parking mode.)
2.
Check the LED light status – all LED light should be shut-down.
3.
Remove the SD memory card from the main system.
Voice command: “Check the SD memory card. Will stop the recording.”
4.
Follow the above process (1.2.3) at the parking mode too.
5.
There will be a voice command if remove the SD memory card is removed from the
system during the operation.
△
After save the data, insert the SD memory card to the system again. The recording will not
work without SD memory card.