Mounting Instructions
II_StraightBolt_02_eng Page 4 of 4
B.
Mechanical Test
Enter code (1,2,3,4,5,6). The lock emits a double signal for the correct code.
Turn Entry unit clockwise until stop. Lock bolt must move freely. Boltwork/door
can be opened.
Move boltwork into Locked Position. Lock bolt must fully extend and secure.
IMPORTANT: Perform the functional test several times before locking the
safe door.
DATA SHEET
Mechanics
Opening
manual
Locking
manual
Blocking element
Motor
Mounting dimensions
standard
Electronics
Power supply
9V ALKALINE battery
Software
Codes
2 (6 digits)
Primary code
1
Secondary code
1
Time Delay
Programmable from 0 (no time delay) to 99 minutes
Battery low signal
yes
Manipulation
protection
5 minute lockout after 4 consecutive wrong codes
Certifications
VdS
Class 2
EN 1300
Class B
UL
Type 1
