22
Fig 01
For valve-and-sensor assemblies, replace valve body, screw and nut, O-ring, valve
insert and valve cap each time tire is replaced or serviced. For incorporated sensors,
replace valve insert, nut, O-ring and valve cap. Appropriate replacement kits are
available from TPM sensor manufacturers.
You may retrieve the correct tightening torques for sensor
installation and view them on tester display using the function
described in paragraph 12.3 “Tightening torques”.
Manufacturer (OEM) part numbers for sensors may be viewed on
tester display using the function described in paragraph 12. “ Part
Number”.
Check sensor for proper operation before refitting the wheel to avoid
removing the wheel again in the event the sensor needs to be
replaced.
16.3. Servicing the sensor with the tire installed.
The instructions outlined above require tire removal. Some tire changers equipped
with double rollers enable sensor inspection and replacement with no need to remove
the tire. If you have this type of equipment, please refer to the manufacturer's
instructions.