manualshive.com logo in svg

Tecnomed Italia MORPHEUS, Installation, Use And Maintenance Manual

Share
Download
Tecnomed Italia MORPHEUS Installation, Use And Maintenance Manual Download Page 38

38

ENGLISH

10- TROUBLESHOOTING

  

PROBLEM

CAUSE

SOLUTION

The device does 
not turn on.

1- The power swith is off.
2- The power swith is damaged.
3- 3.15A phase fuse blown.

1- Press the power switch.
2- Replace the  FUSE F1 with the 
one supplied (REF.1).
3- Contact an authorised 
Tecnomed Italia technician.

The controller 
does not 
respond.

1- Button stuck.

2- Joystick stuck.

1- Turn the device off and on 
again.
2- Press all the keys on the 
controller to make sure their are 
not stuck.
3- Contact an authorised 
Tecnomed Italia technician.

No motor 
movement.

1- The power swith is off. 
2- The 24 VDC 6.3A fuse is blown.

1- Press the power switch.
2- Replace the FUSE F2 with the 
one supplied (REF.2).
3- Contact an authorised 
Tecnomed Italia technician.

RIF. 1 - F1 DA 3,15 A FUSE REPLACEMENT

RIF. 2 - F2 DA 6,3 A FUSE REPLACEMENT

Summary of Contents for MORPHEUS

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands