GB
48
6.1 DATE AND TIME SETTINGS :
PUSH-BUTTON (5)
Set the machine to
ON
.
Press and hold down push-button 5
for more than five seconds to access the
date and time setting function. Display 16
indicates in sequence the abbrevia-
tions Hr (hours), Mn (minutes), dA (day), Mo
(month) and Yr (year), while display 15
shows their respective settings. To scroll the
abbreviations, press push-button 5
.
To modify the settings, use push-buttons 7
and 8
.
6.2 ICE CREAM SURFACE HARDENING
PUSH-BUTTON (6)
Set the machine to
ON
.
Press and hold down push-button 6
for
more than five seconds to access the sur-
face hardening function (push-button LED
flashes). The compressor is switched on; dis-
play 15
shows the default cycle time.
Set the cycle time (in minutes) by means of
push-buttons 7
and 8
. Open the cell
door, place the product inside, then shut the
door to start the cycle. All LEDs remain off,
with the exception of the Start LED. When the
cycle time has elapsed, an acoustic signal is
given. The appliance remains on, ready for
another ice cream hardening cycle. Open
the cell door, remove the hardened product,
replace it, then shut the door. The machine
will perform another hardening cycle for the
time set for the previous one. Every time the
door is opened and closed after a cycle, the
time is reset.
To exit the function, press push-button 6
ADDITIONAL FUNCTIONS
6.3 MUTING THE BEEPER AND ALARM
RESET : PUSH-BUTTON (8)
Press push-button 8
to mute the alarm
beeper.
Alarms are reset :
• by pressing push-button 8
when the
beeper is off;
• automatically if alarm conditions are
removed;
see also section 7 (Alarm Management).
6.4 PROGRAM STORAGE:
PUSH-BUTTON (9)
The programming function is used for cycles
for processing products with the same char-
acteristics. Up to 99 programs can be
stored. Select the type of chilling process
(Soft, Hard, Timed Freezing or by
Temperature), then press and hold push-but-
ton 9
until display 16
shows the
abbreviation P1 (push-button 9
LED
flashes).
Use push-buttons 7
and 8
to set the
number of the program on display 16
.
Start up the cycle by pressing push-button 6
. When the cycle has been completed,
the appliance automatically switches to the
set storage temperature for an indefinite
time.
Press push-button 6
to set the appliance
to STOP status (relative LED switches off),
ready for a new cycle.
6. APPLIANCE FUNCTIONS
