Tecnoma RAMPE VITIFIX, Adjusting, Using And Maintenance

Page: 15 / 47

July-2015 15
CHAPTER 4
4.1 - GENERAl CHARACTERISTICS
Since Tecnoma
regularly updates the specifications of its machines, the following description is not binding.
4.1.1 - VITIFIX BOOM
• Frame fitted on a slide on the column Its height can be adjusted by sliding it manually or using the
hydraulic option.
• The upper part of this frame has two horizontal manual slides allowing lateral adjustment of the position of
the guns
• The guns are fitted in two manually or electrically adjustable positions in the Telesit option, at the end of
the slides.
• Distribution by two independent solenoid spray valves on each side, controlled by a joystick. Where the
Telesit option is fitted or hydraulic lifting is fitted, these are also joystick controlled.
• Where hydraulic lifting is fitted. (option) requires a DE
• Planned for fitting on Vinis, Duo and Vectis
• Standard pneumatic equipment:
◊ 4 hands, 4 guns
• Optional Pneumatic equipment:
◊ 2H/4F fitted instead of standard
4H
◊ 2G-S22 fitted instead of standard
4G-S17
◊ 4H/3F fitted instead of standard
4H
◊ Lower hands behind the unit
(Standard on Vitivario)
◊ Upper 2F hands fitted in reverse on arms for Vitifix, Vitimobil and Vitivario
4.2 - CONFORMITy
your sprayer is fitted with a riveted or glued on identification plate. Refer to chapter
DESCRIPTION OF THE MACHINE
in your sprayer's instruction manual.
4.2.1.1 useful contacts
Refer to chapter
IDENTIFICATION
in this manual
4.3 - EQuIPMENT FOR ROAD TRAVEl
NOTE
• Read the chapter
DESCRIPTION OF THE MACHINE
in the manual
for your machine.
• Equipment for road travel may:
◊ vary depending on the country.
◊ vary depending on the machine to which the
boom is fitted
Fig.2
4 - DESCRIPTION OF THE BOOM