background image

10

ATTENTION:

Although the cooker conforms to
the E.C. Standard on oven door
temperature, the oven doors can
become hot during operation.

KEEP CHILDREN AWAY.

How to use the Autotimer

SETTING THE TIMER TO START AND
STOP COOKING (FULLY AUTOMATIC)

The cooking start time can be set along
with the length of cooking time for fully
automatic cooking. Proceed as follows:

- Turn the outer section of knob B

clockwise until the length of cooking
time is displayed on dial (up to 3 1/2
hours).

- Push and turn the inner section of knob

clockwise until the time that you want
cooking to start is displayed on dial E.

The oven will begin cooking at the start
time set for the length of time set and
switch off when the cooking time is over.
An audible signal will be heard before
the oven switches off. This can be stop-
ped by turning the outer section until
the 

symbol appears on dial D.

SETTING THE TIMER TO STOP
COOKING (SEMI-AUTOMATIC)

Using this mode the oven can be swit-
ched on normally but set to switch off
automatically at the required time.
Proceed as follows:

- Turn the outer section of knob B

clockwise until the length of cooking
time is displayed on dial (up to 3 1/2
hours).

- Select the function and temperature

required.

The oven will operate immediately and
switch off when cooking time is over. An
audible signal will be heard before the
oven switches off. This can be stopped
by turning the outer section of knob B
until the 

symbol appears on dial D.

On completion of cooking, always
remember to set the oven controls back
to the “off” positions and turn the outer
section of knob to the 

symbol.

Ensure that the time on dial matches
the time on dial C.

Summary of Contents for DUO EC 3

















Reviews: