GB / IE - 2
Part 2
Use
General Instructions
Connection to the mains, installation, and maintenance of the appliance must only be carried out by qualified technicians only,
in observance of all applicable regulations!
We recommend using pots with flat bottoms. Turn the hot plate on
after placing the pan on it.
Avoid spilling cold liquids on the hot plate.
Turning the hot plates on
Switch the power on using the switch upstream of the appliance.
Turn knob “A” pic.1 of the desired plate, until it fits with the index of the
panel in the chosen position; the relevant green luminous indicator
green “B” pic.1 will light.
The maximum power corresponds to position “6”; the minimum one
corresponds to position “1”.
When you turn the appliance on, first turn the knob to position “6”;
when the maximum temperature for cooking is reached, turn the
knob to a lower position. The hot plates feature a temperature limiter
that cuts off the electric supply: when the temperature reaches
450°C, the limiter reactivates automatically.
Turning the hot plates off
Turn the knob to “0”. Switch the power off using the switch upstream of the appliance.
Turning the electric oven on
The heating elements are controlled by a 4 position selector switch,
while the temperature inside the chamber is controlled by a
thermostat (60-300°C).
The selector lets you choose the most suitable type of heating using
the appropriate heating elements.
Turn the knob “C” pic.1 of the heating elements' selector to one of
the on positions. When the green indicator “E” pic.1 lights, the oven
is supplied with power.
Turn the knob "D" pic.1 of the thermostat until you reach the desired
cooking temperature. The orange luminous indicator “F” pic.1 lights
indicating that the heating elements are on.
Positions of knob C
0 Off
Top and bottom heating elements
Top heating element “Grill”
Bottom heating element
Positions of knob D
°C 0 60 120 150 180 210 240 270 300
All the cooking must be done with the oven door closed.
Turning the electric oven off
Turn knobs “C” and “D” pic.1 to “0”. Disconnect the switch upstream of the appliance.
Safety Thermostat
The appliance is equipped with a safety thermostat that cuts off the
electric power supply in case of anomalies or overheating.
To turn the appliance on again, remove the control panel unscrewing
the screws at its bottom; then press button “G” pic.1. This operation
must be carried out by a specialised technician.
