Tecnogas TEO706MB, Service Manual

Page: 3 / 154

3
1. WARNINGS
This product is manufactured in accordance with the safety regulations. Throughout this user
manual the following symbols are used.
1.1. General Safety Warnings

The product must be disconnected during installation, maintenance and repair.

Rear surface of the oven gets hot when it is in use. Make sure that the electrical connection does
not contact the rear surface; otherwise, connections can get damaged.

Be careful not to use the damaged component and replace it with a new one.

Make sure that loose and damaged cables are not used.

When replacing electrical components, be sure that there is no liquid or moisture on the new used
part.

If the power plug is damaged, do not use the product.

For safety reasons, do not extend the cable by means of an attachment, and do not use an
extension cable.

Make sure that fuse rating is compatible with the product.
1.2. Safety For Montage

Product must be placed directly on the flat floor. If the floor is not flat, ask the customer to adjust
the floor planability.

The mains cable should not be over hot surfaces during installation. As a result of melting the
cable, you may cause the product to short circuit and fire.

Make sure that the cables are not cut and damaged during installation. If it is cut and damaged,
replace it with a new one.
Important information or useful hints about usage.
Warning of hazardous situations with regard to life and property.
Warning of electric shock.
Warning of risk of fire.
Warning of hot surfaces.