_ Electric Ovens _ rev. 1 _____________________________________________________ KF 412- KF 723-
KF 723M _
________________________________________________________________________________________
_ page 9 _
1. Technical service
A technical check-up once or twice a year helps prolong the life of the appliance and
guarantees better operation. Make sure that assistance is carried out solely and exclusively
by qualified personnel. For any spare parts orders or for any information about the appliance,
always mention the serial number and model (data indicated on the "technical data" plate at
the rear of the oven).
2. General warnings
Very important!: keep this instruction book together with the appliance for future
consultation.
These warnings were drafted for your safety and for that of others. Please read them
carefully before installing or using the appliance:
- The appliance is intended for professional use and must be utilised by qualified
personnel trained to use it.
- Any modification which may be necessary on the electrical system to enable
installation of the appliance, must be carried out solely by competent personnel.
- It is dangerous to modify or attempt to modify the characteristics of this appliance.
- Never clean the appliance with direct water jets, because, if any water enters, it could
limit the machine's safety .
- Before doing any maintenance or cleaning jobs, disconnect the appliance from the
electrical mains and allow it to cool.
- Do not attempt to carry out the periodic controls or any repairs by yourself. Contact
the nearest Service Centre and use only original spare parts.
N.B.: Improper or incorrect use and failure to observe the installation instructions
shall release the manufacture from all responsibility. In this connection, the
directives in the "POSITIONING" paragraph must be strictly observed.
3. Technical specifications
Appliance
model
Cooking
chamber
Vol.
(dm
³
=It)
Convectio
n heating
element
(kW)
Grill
heating
element
(kW)
Top and
bottom
heatel
(kW)
Motorised
cooling
ventilator
(W)
Dimensions
of appliance
(mm) LxDxH
Weight of
appliance
(Kg)
KF 412
23
2.5
/
/
/
540x455x40
0
20
KF 723
54
2.5
/
/
/
690x545x51
0
31
KF 723 M
46
2.5
1.9
2.3
30
690x545x51
0
34
Power vals.
(W)
CONVECTION MOTORISED
VENTIL.:
50
LIGHTING LAMP:
15
Max. absorbed power
(kW)
2.6
Power supply voltage
(V~)
(50 Hz) 220/230
Class
I (against electric shocks)
Degree of protection against
IPX0