TECNOEKA KCV 96, Use And Instruction Manual

Page: 7 / 20

_ Electric Cookers _ rev. 1 _________________________________________________________ KCV 96 P – KCV 96_
_ CATEGORY II2H3+ _ GB __
0705
_____________________________________________________ page 7 _
Technical specifications Technical specifications Technical specifications Technical specifications
Model Model Model Model KCV 96 P KCV 96 P KCV 96 P KCV 96 P KCV 96 KCV 96 KCV 96 KCV 96
Overall dimensions LxDxH (mm) 900x600x850
Oven dimensions LxDxH (mm) 510x410x345
Usable oven volume (dm
3
) 72
Tray maximal load (GN 1/1) kg 4
Total load (4 trays GN 1/1) kg 16
Electrical capacity of grill heating
element (W)
2500
Electrical capacity of oven (W) 2400 5000
Maximum electrical capacity (W) 2530 5150
Power supply voltage (V~) 220-230 380-400 2N
Frequency (Hz) 50
Class I (against electric shocks)
Nominal thermal capacity (kW) 14.25
Appliance category
(for United Kingdom)
II2H3+
Gas connection
½
” ” ” ”
Installation class Class 2 - subclass 1 / Class 1
Factory adjustment Natural gas G20 – 20 mbar
Supply nominal pressure values Liquid gas G30 / G31: 30/37 mbar - Natural gas G20: 20 mbar
The “technical data” page is located on the rear panel of the appliance. The “technical data” page is located on the rear panel of the appliance. The “technical data” page is located on the rear panel of the appliance. The “technical data” page is located on the rear panel of the appliance.
2.
2. 2.
2. Flush fitting in unit furniture
Flush fitting in unit furniture Flush fitting in unit furniture
Flush fitting in unit furniture
Make absolutely sure that the rear of the appliance always rests against non flammable walls.
Set the basement zone free.
If the cooking range is positioned on a pedestal, the appropriate measures must be taken to
ensure that it never slides off or tips over from the pedestal.
The appliance can be installed as follows (Fig. 1):
-
Stand-alone, away from other forniture (class 1);
-
Fitted between two forniture units (class 2 –
subclass 1).
In compliance with safety regulations, protection
against possible contact with electrical parts and
against overheating of furniture in contact wst the
appliance, must be ensured by correctly flush fitting
the appliance.
May we remind you that, for layers in plastic or
veneered wood in unit furniture, glues resisting a
temperature of 120°C must be used. Plastics or
glues of poorer quality not able to withstand this
temperature value, will cause deformation and glue
detachment.
Fig. 1
Fig. 1 Fig. 1
Fig. 1