Electric Ovens rev. 0 ________________________________________________ EKF 423 P - EKF 423 UP
_________________________________________________________________________________ page 5
1. Technical service
A technical check-up once or twice a year helps prolong the life of the appliance and
guarantees better operation. Make sure that assistance is carried out solely and exclusively
by qualified personnel. For any spare parts orders or for any information about the appliance,
always mention the serial number and model (data indicated on the "technical data" plate at
the rear of the oven).
2. General warnings
Very important!: keep this instruction book together with the appliance for future consultation.
These warnings were drafted for your safety and for that of others. Please read them
carefully before installing or using the appliance:
- If, on receipt of the goods, the packaging is damaged, write the following on the
delivery note: “I REVERSE THE RIGHT TO CONTROL THE GOODS”, specify the
damage and get the driver to sign in acceptance; send a claim in writing to the seller
within 4 calendar days from the date of receipt. No claim shall be accepted after such
period.
- The warehouse inside temperature must not be lower than -9°C; otherwise, the
thermostat (regulation and safety thermostat) control devices of the machine will be
damaged. Failure to observe this prohibition invalidates any responsibility of the
manufacturer of the machine.
- The appliance is intended for professional use and must be utilised by qualified
personnel trained to use it.
- Any modification which may be necessary on the electrical system to enable
installation of the appliance, must be carried out solely by competent personnel.
- It is dangerous to modify or attempt to modify the characteristics of this appliance.
- Never clean the appliance with direct water jets, because, if any water enters, it could
limit the machine's safety .
- Before doing any maintenance or cleaning jobs, disconnect the appliance from the
electrical mains and allow it to cool.
- Do not attempt to carry out the periodic controls or any repairs by yourself. Contact
the nearest Service Centre and use only original spare parts.
- When the tilting door is wide open, do not put anything on the surface, because the
door hinges could be irreparably damaged.
N.B.: Improper or incorrect use and failure to observe the installation instructions shall
release the manufacture from all responsibility. In this connection, the directives in the
"POSITIONING" paragraph must be strictly observed.
3. Technical specifications
Dimensions of appliance (mm) LxDxH
590x695x590
Weight of appliance (Kg)
31
Max absorted power (kW)
2,8
Convection heating element (kW)
2,7
Maximum load per pan (kg)
1,5
Power supply voltage (V~)
230 V
~
(50/60 Hz)
Appliance class
I
Power cable diameter
3x1,5 mm
²
Type of cable
H07RN-F
Electric cable connection
Type Y
The noise level of the appliance in operation is below 70 dB (A).
The "technical data" plate is positioned on the rear panel of the appliance.
