TECNOEKA Srl ______________________________________________________________ use and instruction manual
page 6 ________________________________________________________________________________________
2900W
BE-FR
II2E+3+
G20/G25-G30/G31
20/25; 28/37 mbar
2001
NL
II2L3B/P
G25-G30/G31
25 ; 30/30 mbar
0705
NO
I3B/P
G30/G31
30/30 mbar
N
705BM098
Technical specifications
Model
EKC 96 / EKC 96/001
EKC 96/002
EKC 96.3
Overall dimensions
LxDxH
(mm)
900x655x900
Tray maximal load (GN 1/1)
kg
4
Total load (4 trays GN 1/1)
kg
16
Electrical capacity of grill heating
element
(W)
2500
Electrical capacity of oven
(W)
2700
5000
Maximum electrical capacity
(W)
2900
5150
Power supply voltage
(V~)
220-230
380-400 2N
Frequency
(Hz)
50
Class
I
Nominal thermal capacity
(kW)
14,25
Appliance category
(for United Kingdom)
II2H3+
Gas connection
½
”
Installation class
Class 2 - subclass 1 / Class 1
Supply nominal pressure values
Liquid gas G30 / G31: 30/37 mbar - Natural gas G20:
20 mbar
The “technical data” page is located on the rear panel of the appliance.
2. Flush fitting in unit furniture
Make absolutely sure that the rear of the appliance always rests against non flammable walls.
Set the basement zone free.
If the cooking range is positioned on a pedestal, the appropriate measures must be taken to
ensure that it never slides off or tips over from the pedestal.
The appliance can be installed as follows (Fig. 1):
-
Stand-alone, away from other forniture (class 1);
-
Fitted between two forniture units (class 2 –
subclass 1).
In compliance with safety regulations, protection
against possible contact with electrical parts and
against overheating of furniture in contact wst the
appliance, must be ensured by correctly flush fitting
the appliance.
May we remind you that, for layers in plastic or
veneered wood in unit furniture, glues resisting a
temperature of 120°C must be used. Plastics or
glues of poorer quality not able to withstand this
temperature value, will cause deformation and glue
detachment.
Fig. 1
