Gas Filter
designed in accordance with the EN12516 and DIN3840.
Can be used for all the types of natural gas, LPG or not corrosive
gases. These filters are widely used for protection of control
devices, pressure regulators, meters and on systems that requiring
an high degree of filtration. All the
Gas Filter
covers are filled with
connections for test point both at the filter inlet and outlet.
All the operations shall be made by specialized technicians.
Gas Filter
Cover
Seal NBR o-ring
Filter cartidge PP
Slotting guides
MARKING
MARKING
MARKING
MARKING
MARKING
Depending on which model,
Gas Filter
are marked by label with
their technical characteristics.
REPLACEMENT OF THE CARTRIDGE
REPLACEMENT OF THE CARTRIDGE
REPLACEMENT OF THE CARTRIDGE
REPLACEMENT OF THE CARTRIDGE
REPLACEMENT OF THE CARTRIDGE
Before any operation of maintenance, you need to check that
the valve installed before and after the
Gas Filter
are closed and
the pressure are discarged with the drain plug.
Unscrew the screws of the cover, remove the cover, extract the
cartridge e replace it with a new one, positioning as indicated
inside the body.
Reassembly the body, and check that the cartridge comes inside
correctly on the cover. Fix the screw with cross sequence.
Perform a leak test of the system.
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
English
Test point
Seal NBR o-ring
Viledon cartidge
Slotting guides
GF025SC
GF025
GAS FILTER
GAS FILTER
GAS FILTER
GAS FILTER
GAS FILTER
GF015 1/2” P-max 6 bar
Filtration degree 50micron
S/N 000037/14
GENERAL CONDITIONS OF WARRANTY
GENERAL CONDITIONS OF WARRANTY
GENERAL CONDITIONS OF WARRANTY
GENERAL CONDITIONS OF WARRANTY
GENERAL CONDITIONS OF WARRANTY
THE PRESENT CERTIFICATE IS THE ONLY DOCUMENT TO HAVE
THE PRESENT CERTIFICATE IS THE ONLY DOCUMENT TO HAVE
THE PRESENT CERTIFICATE IS THE ONLY DOCUMENT TO HAVE
THE PRESENT CERTIFICATE IS THE ONLY DOCUMENT TO HAVE
THE PRESENT CERTIFICATE IS THE ONLY DOCUMENT TO HAVE
THE RIGHT OF REPARATION OF THE PRODUCT IN WARRANTY
THE RIGHT OF REPARATION OF THE PRODUCT IN WARRANTY
THE RIGHT OF REPARATION OF THE PRODUCT IN WARRANTY
THE RIGHT OF REPARATION OF THE PRODUCT IN WARRANTY
THE RIGHT OF REPARATION OF THE PRODUCT IN WARRANTY
- The product is warranted for 24 month from purchase date.
- Any damages caused by tampering and incorrect use or installation
will be not covered by warranty.
- The warranty is valid only if is full compiled.
- In case of defects covered by warranty, the producer will repair or
replace the free product.
PERFORMANCES OUT OF WARRANTY:
PERFORMANCES OUT OF WARRANTY:
PERFORMANCES OUT OF WARRANTY:
PERFORMANCES OUT OF WARRANTY:
PERFORMANCES OUT OF WARRANTY:
When warranty’s terms are spent, the eventual reparations will debited
in according to the replaced parts and to the hand costs.
The device must be mounted away from the plasters, keeping a
distance from the cover to allow the maintenance operations.
Use the tightening torques specified in the standard EN1361, not
by leveraging on the body.
GF025SC
GF025
1
3
GF=GAS FILTER
DIMENSIONS:
015SC =1/2”
(
S
mall
C
apacity)
020SC =3/4”
(
S
mall
C
apacity)
025SC= 1”
(
S
mall
C
apacity)
015 =1/2”
020 =3/4”
025= 1”
25=DN25
032= 1
1/4
”
32= DN32
040= 1
1/2
”
40= DN40
050= 2”
50= DN50
65= DN65
80 =DN80
100= DN100
125= DN125
150= DN150
4
OPTIONAL:
SP= Screw Plugs
TPIO=Test Point IN/OUT
Made
Made
Made
Made
Made
in
in
in
in
in
Italy
Italy
Italy
Italy
Italy
5
BAR:
= 6bar
-10B= 10bar
0497
GFD
050
-TPIO-10B
3
4
5
1
2
CONNECTION:
=Threaded
D= Flanged
2
GENERAL DESCRIPTION
GENERAL DESCRIPTION
GENERAL DESCRIPTION
GENERAL DESCRIPTION
GENERAL DESCRIPTION
