11
55.
0
IGNITION AND IONISATION ELECTRODES
For a proper ignition and operation of the appliance it is important to verify the exact position of ignition
and ionisation electrodes. Particularly, make sure that the ignition discharge takes place at the level of the
burner tubular slits at a distance of 3-4 mm.
51.
0
COMBUSTION ANALYSIS
Regularly carry out a combustion analysis, not least in compliance with the relevant regulations
.
57.
0
HEAT EXCHANGER CLEANING
The heat exchanger cleaning (inside and outside) is to be performed by skilled and qualified personnel and
it is regulated by detailed Standards. In general, it is recommended to clean the exchanger at least once a
year, at the beginning of winter.
58.
0
ASSISTANCE
To have information about the nearest authorised Assistance Centre, please contact the Seller who shall
give you all the necessary information in this regard.
