GENERAL DESCRIPTION
Nota 503
is an electronic Thermostat with display which allows
you to set the “Day” (
) and “Night” (
) temperatures into
your home as you like and to modify them in an extremely easy
way.
POWER SUPPLY
Nota 503
is powered with two common alkaline little penlight
1,5V batteries which guarantee its functioning for minimum one
year. To insert batteries, make the batteries cover slide and place
the batteries paying attention to the polarity indicated into the
batteries housing (Fig.1).
Fig.1
To open the thermostat
Nota 503
you need, with a screw driver,
to exert pressure in the two clefts placed on the bottom side of
the product (Fig.2).
Terminal
N.C.
(Normally close)
Terminal
N.A.
(Normally open)
Terminal
C
(common)
Open the thermostat
Nota 503
and then unthread the connector
from the card relais. Fig.3-4
INSTALLATION
Nota 503
can be directly installed on a 3 module recess box
(Fig.5), or on the wall (Fig.6). In either cases, it is advisable to
position it at a height of 1,5 metres from the wall, in a dry place,
away from draughts and heat sources
.
Install the base of the thermostat
Nota 503
directly on the box 3
modules (using screws type A) or on the wished wall (using
plugs type B) issued with the thermostat.
PAY ATTENTION: AVOID ANY EXCESSIVE SCREWING
After you installed the base of thermostat
Nota 503
, connected
electrically the thermostat as pict. 7 or 8.
Fig.5
Pay attention: to close the thermostat
Nota
503
insert before the two “UPPER
PIVOTS” of the front panel.
Fig.2
Connector
Card relais
Base
Fig.3
Fig.6
Fig.4
Nota 503
Model
Colour
Description
3.
556.
1361
Thermostat wall mounted
White
3.
557.
1462
Anthracite
Thermostat wall mounted
English
ELECTRONIC THERMOSTAT
ELECTRONIC THERMOSTAT
ELECTRONIC THERMOSTAT
ELECTRONIC THERMOSTAT
ELECTRONIC THERMOSTAT
WITH DISPLAY WALL MOUNTED
WITH DISPLAY WALL MOUNTED
WITH DISPLAY WALL MOUNTED
WITH DISPLAY WALL MOUNTED
WITH DISPLAY WALL MOUNTED
GENERAL WARRANTY CONDITIONS
THE PRESENT CERTIFICATE IS THE ONLY DOCUMENT WHICH GIVES YOU THE RIGHT
TO THE PRODUCT REPAIR UNDER WARRANTY
- The product is GUARANTEE for a period of 24 months from the buying date.
- Evenctual damages originated from tampering, illegal opening, inappropriate or wrong use or installation
are not covered by the WARRANTY.
- GUARANTEE is valid only if properly filled in.
- In case of faults covered by the WARRANTY, the producer will repair or replace the product free of
charge.
OUT OF WARRANTY PERFORMANCES:
Elapsed the terms or the period of WARRANTY, evenctual repair activities will be charged in relation
to the replaced parts and to the labour costs.
.
ELECTRICAL CONNECTIONS
Fig.6
