GECA
Srl
Via E. Fermi, n°98 25064 Gussago (BS)
Italy Tel. +39 030 3730218
www.gecasrl.it
Tecnocontrol
Srl
Via Miglioli, n°47 20090 Segrate (MI)
Italy Tel. +39 02 26922890
www.tecnocontrol.it
TECHNICAL CHARACTERISTICS
- Power:
Lithium battery 3V - 1400 mAh (NOT replaceable)
- Battery life:
more than 6 years (in normal operation)
- Sensor life:
more than 6 years in a domestic environment according
to specifications.
- Working temperature:
-10 ° C ... + 45 ° C.
- Relative humidity:
30% ... 90% UR.
- Sensor operation limit:
5000 ppm max 15 minutes
- Maximum storage time:
6 months
- Intervention thresholds:
l
50 ppm for 70 minutes.
l
100 ppm for 20 minutes.
l
300 ppm for 1 minute.
- Acoustic signal:
80 dB (A) to 1 meter.
- Protection degree:
IP42.
- Electronic self-diagnosis with anomaly signal.
- The CO alarm device conforms to the European standard EN 50291-1: 2010
“Electrical devices for the detection of carbon monoxide in domestic environ-
ments”.
SALES CONDITION
THE PRESENT CERTIFICATE IS THE ONLY DOCUMENT TO HAVE THE RIGHT OF
REPARATION OF DEVICE IN WARRANTY
• The product is warranted for 24 month from purchase date.
• Any damages caused by tampering and incorrect use or installation will be
not covered by warranty.
• The warranty is valid only if is full compiled.
• In case of defects covered by warranty, the producer will repair or replace
the free product.
PERFORMANCES OUT OF WARRANTY:
When warranty’s terms are spent, the eventual reparations will debited in ac-
cording to the replaced parts and to the hand costs.
WARRANTY CERTIFICATE
COMPILE AND SEND IN CASE OF DAMAGE.
DEVICE:
serie
Beta
mod. 762/CO serie
Beta
mod. SE325EC
Serial number (s.n.)___________________________________________
DEALER
Stamp:
Date of purchase:
________/________/________
USER
Surname and name____________________________________________
Address______________________________________N°_____________
City_________________________________________________________
Telephone____________________________________________________
TO COMPILE BY THE INSTALLER:
Installation date ______________________________________________
Substitution date _____________________________________________
Installation local ______________________________________________
Instruments’ serial number ______________________________________
(to read on the frontal plastic involucres)
Stamp
Sign
______________________________________________________
The manufacturer firm reserves the right to make any aesthetic or functional modification to the without prior
notice at any time.
1) Open doors and windows to increase the ventilation of the environ-
ment.
2) Close the gas counter tap and stop using any combustion device.
3) If the alarm continues and the cause of gas leak is not detectable
or negligible, abandon the property and, from the outside, alert the
emergency service.
4) If there were people with nausea or headache symptoms, immedi-
ately call the health emergency number.
If the alarm stops, it is necessary to identify the cause that has caused
it and to act accordingly.
ATTENTION!
In the event of an alarm:
We warmly suggest doing a check-test of the detector working, car-
ried-out from your installer - at least once a year.
PERIODICAL VERIFICATIONS
WARNING
To clean the appliance, use a cloth to remove the dust on the case.
Keep in mind that the sensor has good resistance to commonly used
products such as sprays, detergents, alcohol, glues or paints, but
these products can contain substances that, in large quantities, inter-
fere with the sensor causing false alarms.
It is advisable to ventilate the room when using these products.
Solvent or silicone vapors can deteriorate the gas sensor even during
storage in the warehouse.
The use of the gas detector outside the temperature range and hu-
midity indicated may damage the sensor and reduce its life duration.
It is reminded that the detector is unable to detect leaks that occur
outside the room where it is installed either inside the walls or under
the floor.
Dis. 0134183 Cod. 2.710.2991
l
silence the BUZZER sound (
Beep
) when the detector is in ALARM
status with a concentration below 300 ppm.
The gas detector will stop “
Beep
” for 15 minutes while the RED LED
will continue to flash.
After 15 minutes if there is still a concentration of harmful carbon mo-
noxide (CO), BUZZER will be automatically switched on.
5
6
