TECNO AIR SYSTEM
Essege Group
pag. 32 di 40
REMOTE ACTIVATION FUNCTION (AUX port)
Using a special connection cable (code LINX000600), you can turn the stove on / off using a remote device
such as: a GSM telephone activator, a WiFi modem, an environment thermostat, a consensus from a home
automation system.
For this connection, contact your authorized service center,
Recommending the use of a device with clean contact with the following logic:
Open contact = stove off
Closed contact = stove switched on
Activation and deactivation takes place with 10 “delay from the transfer of the last command.
In case of connecting the remote activation door, you can still turn the stove on and off from the control
panel; The stove will always be energized respecting the last received order, turning it on or off.
CAUTION, only for timer versions: Activating the internal timer program (see Weekly Programming Setting)
automatically excludes remote activation (aux port), this is to avoid conflicts of programmed activations.
SELECT CLOCK TIME
Push for 2” the button SET , we access in order to choose from the menu setup, it will appear on the
display the text
TS
, pressing the button we can slide the various menù available, choose the menù
Prog
and confirm to enter in programming and pressing again the button SET
To set the time, with the button select on the display SET , confirm the selection pushing the button
SET , then set the current time:
With the key we increase the time of 15’ each pression, with the button we decrease the time of 1’each
pression; give confirm the setting with the button SET, so set the current week day by the buttons
( e.g., Monday=Day 1), give confirm the setting with the key SET, to exit from the setting pushing the key
ESC.
WEEKLY PROGRAMMER SETTING
Push for 2” the button SET , we accede in order to choose the setting menu, it will appear on the display
the text
TS
, pressing the buttons it can slide the various available menu, to choose the menù
Prog
and confirm the intention to enter in programming by pressing the key SET
Pressing the keys we can slide the setting of the time:
Pr OF
: enable (On) or disable (OF) completely the using of weekly timer
Pr 1 :
Programming band program 1
Pr 2 :
Programming band program 2
Pr 3 :
Programming band program 3
Set:
it allows to set the current time.
To activate the weekly program, select Pr OF on display , push the button SET and select
On
with
the keys to enable select
OFF
, confirm the setting with the button SET, to exit from the programming
it push the button ESC.
How to set the first time zone of the timer weekly:
Pr 1:
This is the n° 1 program, in this time it set a power on time, a turn off time and the days to
witch the Pr 1 applied.
Push for 2” the button SET , it will access at the setting menù, it will appear on the display the text
TS
,
pressing the buttons it allows slide the various available menù, choose the menù
Prog
and confirm
the purpose to enter in the programming pushing again the key SET .
✓
✓
✓
✓
✓
✓