6
www.tecnetusa.com
▶
5.1 CTCSS/DCS/DCS Invertor sub-tone channel selection:
Press Menu (P) button for more than 1 second and the radio will go into function setting mode.
Press UP (
▲
) or DOWN (
▼
) button to select Type of Sub-Channel.
CTCSS Sub-Channel : ( )
DCS Sub-Channel : ( )
DCS Inverter Sub-Channel : ( )
No setting Sub-Channel : ( )
To select CTCSS tone sub-channel, select ( ) by pressing UP (
▲
) or DOWN (
▼
) button, and
Press Enter ( ) button to confirm.
Sub-Tone channel LCD digit will be blinking
Press Up or DOWN to select your desired CTCSS tone (1~38), and press Enter ( ) button to
confirm.
To exit from menu, press M button or PTT switch.
Use same method to set up DCS ( ) or DCS Invertor ( ) Sub-Tone Channels.
▶
5.2 VOX function On/Off selection:
Press Menu (P) button for more than 1 second and the radio will enter into function setting mode.
Press Menu (P) button again. Then VOX setting Icons will be blinking.
By pressing UP (
▲
) or DOWN (
▼
) button, you can select on or off. Press Enter ( ) button
to confirm. To exit from menu, press M button or PTT switch.
▶
5.3 Scan On/Off selection:
Press Menu (P) button for more than 1 second and the radio will enter into function setting mode.
Press Menu (P) button 2 times. Radio will go to Scan setting menu mode.
By presssing UP (
▲
) or DOWN (
▼
) button, you can select On or Off.
Select On and press Enter ( ) button to confirm Scan On.
To exit from menu, press M button or PTT switch.
With Scan On, you may enable the Scan operation by pressing Menu (P) and Enter ( )
buttons at the same time. The SCAN icon will appear and the radio will begin to Scan all channels
(27 for VHF and 89 for UHF).
