TECNARE V 10, User Manual, Page: 8 / 28

V series User’s Manual
8/28
The two socket speakon pins in the box
are connected in parallel within the
enclosure, so either connector can be used
to connect an amplifier or to link to an
additional Array series or Tenare unit.
Tecnare recommends a maximum length
cable according to the section cable used.
Section [mm 2 ]
Impedance 1.5 2.5 2.5
2 3 5 8
3 4.5 7.5 12
4 6 10 16
6 9 15 24
8 12 20 32
12 18 30 48
16 24 40 64
5.1.2 Amplifier selection
Tecnare recommends amplifiers in
agreement with the table below:
Unit Conf.
2 x V10 1 x MA800
2 x V12 1 x MA2400
2 x V15 1 x MA2400
4 x V10 + 2 x SW118M 1 x 1 x MH4000
2 x V12 + 2 x SW118M 1x 1 x MH4000
2 x V15 + 2 x SW118M 1x 1 x MH4000
5.1.3 V Series and DPA-28X
The DPA 28X is a complete 2 input - 8
output digital loudspeaker management
system designed for the touring or fixed
sound installation markets. The absolute
latest in available technology is utilized
with 64-bit floating point processors and
high performance 24-bit Analogue
Converters. The high-bit DSP prevents
noise and distortion induced by truncation
errors of the commonly used 24-bit fixed-
point devices. A complete set of
parameters include I/O levels, delay,
polarity, 8 bands of parametric EQ per
channel, multiple crossover selections,
compressor, Limiter, USB and Ethernet
port connection. Precise frequency control
is achieved with its 1 Hz resolution.
The DPA - 28X can be controlled or
configured in real time on the front panel
using the previously stored presets or with
the intuitive PC software via the USB or
Ethernet interface. The Ethernet port
allows controlling the device from a long
distance using just an Internet connection.
5.1.3.1 FEATURES
•
2 Input and 8 Outputs.
•
64 Bits floating point DSP
•
High performance 24-bit A/D
Converters
•
1 Hz Frequency Resolution
•
Storage of up to 10 program
setups
•
Unlimited number of presets via
software
•
Uploading of 10 collection presets
in one step via software