TECNARE Sub Series, Operation Manual

Page: 19 / 24

SW-118M Operation Manual
Subwoofer Series | rev. 2.00
16
5 Technical specifications
SW-118M COMPACT SUBWOOFER SPECIFICATIONS
ACOUSTICAL
Operating Frequency Range
35Hz -400 Hz±3dB , measured on axis. 35Hz-140Hz Recommended operating frequency range.
Response depends on loading conditions and room acoustics
Axial Sensitivity 98 dB (1w/1m)
Calculated SPL 129 dB continuous/135 Peak
Nominal Dispersion 360º for a single unit; varies with number of units and configurations
COMPONENTS
Low Frequency 1 x 18-inch cone driver ferrite magnets, direct radiation, bass-reflex
Nominal impedance: 8Ω
Voice coil size: 4-inch
Power Handling Capability: 1200 W AES / 2400 W continuous
Note : Power Handling measured using AES Standards= 2 hours test made with continuous pink noise
signal (6 db crest factor).
AUDIO INPUT
Connectors IN: 1 x NL4 SpeakON
®
LINK: 1 x NL4 SpeakON
®
Wiring Pin 1+/-: LF+/- ; Pin 2+/- : Parallel; Optional wiring: Pin 1+/-: Parallel; Pin 2+/-: LF+/-
PHYSICAL
Enclosure 18mm birch plywood. Finished in Polyurea surface
Protective Grille Powder-coated perforated steel with acoustically transparent reticulated foam
Rigging Integral 38 mm (1-1/2-inch) pole-mount receptacle on top; Optional TRK-118 rigging kit for arrays with
CLa208 curvilinear array loudspeaker. Eight recessed carrying handle
Dimensions (HxWxD) 596mm x 590mm x 691mm (23.46” x 23.23” x 27.20”)
Dimensions w/rigging 556mm x 622mm x 691mm (23.46” x 24.48” x 27.20”)
Weight 46 Kg. (101.41lbs), with rigging, 60 kg. (132.28 lbs)
Application information is presented for guidance only. Exel Acoustics SL reserves the right to make any necessary
changes to the products and the published specifications. As part of the on-going development program Exel Acoustics
SL tries to maintain the highest degree of product compatibility.