SW-118M Operation Manual
7
Subwoofer Series | rev.
2.00
1.3 Processing and Amplification
Only operate Tecnare loudspeaker with a correctly configured Tecnare preset. Tecnare
offer a complete solution that guarantees the highest level of performance. A complete range of
controllers, amplified and amplified controller with DSP are available to get this objective.
Otherwise, there is a risk of damaging the loudspeaker components.
1.3.1
Processing
There are two options using our digital controllers. Our
DP2696
or
DP4896
. The options
vary depending on the final application.
Refer to DP2696 or DP4896 user manual.
1.3.2
Amplification
To power Sub Series, Tecnare recommends amplifiers with the power ratings enough to
feed the loudspeakers. For high power or live applications, it is recommended to
oversize the amplifiers relative to the nominal AES output of the subwoofers. In certain
specific cases it is possible to slightly under-power the subs or loudspeakers as long as
the amplifier will not be driven to its limits.
In any case, the Tecnare processors should be deployed in front of the amp to ensure
that the amplifiers to not go into clip.
The
DP4896
processors also include:
- Thermal protection from power surges or overload
- Excursion displacement protection
The
T20-44
amplifier is the ideal companion for maximum performance of the Sub
Series loudspeakers. This amplifier controller with DSP offer a complete both preset and
protection solution for any application.
Summary of Contents for Sub Series
Page 2: ......
Page 22: ...SW 118M Operation Manual 19 Subwoofer Series rev 2 00 ...