TE70 IR-HEATER
PAGE 13
5.0 TEMPERATURE PROFILE WORK MODE
The temperature profile work mode must be used every time you want
to generate variable-temperature heating over time, the temporal
duration of which is determined a priori. The variable-temperature
profile work mode is useful to reduce the paint drying time or the
polymerization time of the structural adhesives.
The profile generated by the TE70 heater can contain up to 5 program
steps: each step is characterized by power delivered by the heating tool,
by a temperature value the heated surface must reach and by time
duration.
After setting the temperature profile, simply place the tool on the
surface to be heated and lock the Start, through the appropriate button,
on the tool's handle in the ON position. The TE70 heater will perform
the programmed profile steps in sequence and at the end of the
execution the tool will automatically stop delivering heat.
The maximum duration of each step can be 4 hours for a total maximum
duration of the heating process of 20 hours.
The setting of the power delivered by the tool allows the adjustment of
the speed with which the required temperature will be reached on the
surface of the material subjected to infrared radiation. On reaching the
temperature set on the TE70 heater, the control unit will begin to
modulate the power delivered to the tool to maintain constant the
temperature of the heated surface.
