TECNA TE 500, User Manual, Page: 14 / 52

14 / 52
AMMETER CAPACITY
This parameter indicates the ammeter capacity of the control unit. Keep in mind that the capacity refers
to simple harmonic currents and as such overflow conditions might occur even with effective current
values lower than the nominal value of the carrying capacity and this depends on the sensitiveness of
the connected transducer.
CALIBRATION
Set this parameter to ON for starting the self-calibration procedure. For further information refer to the
relevant paragraph.
LANGUAGE
With this parameter the user programs the language in which the control unit should display both the
parameters to be set and the error messages.