ATEX heating kit – Air System
Assembly instruction
Pagina
2
di 4
Istruzione n°
220
- Rev.
00
del 05/11/2018
EN
Copyright © 2018 Tecmec S.r.l.
ISTRUZIONI ORIGINALI
WARNING
Consider the size and weights of the various components that will be moved.
Is fundamental constraint that the below mentioned installation steps are carried out by least
two people with safety gloves and shoes.
In case of already installed cabinet, empty and move it from wall.
1.
Remove the
four internal
screws of the
rear panels.
2.
Loosen the
screws that
lock the rear
panels.
3.
Lift the back
panels and
remove them
.
4.
Unscrew the three screws and remove the stirring shelf protection (if the agitation option is provided).
5.
Insert the slotted holes of the six sides on the
screws that before fixed the rear panels
.
6.
Loosen few millimeter the four screws on the cabinet
sides.
2
3
