5
TECMASCHIN
01495 707222
www.topregal.co.uk
BEFORE THE FIRST USE:
For safety reasons, the HU-P1316 hand strapping
tool and the spare battery pack arrive discharged.
Fully charge the batteries.
1. Pull the battery box cover up in the direction
of the arrow.
2. When the battery is inserted, the current charging
status is briefly indicated by a colored LED light
on the top.
Remove discharged batteries and recharge them to make
the device ready for use again.
If you use PP strapping, replace the internal spring with the
enclosed one. See section „Adjustment of the welding pressure“
for this.
Color
Status
Blue
Ready for use
Red flashing
Low battery power
Red glow
Machine error
Violet luminous
Work finished
LED STATUS INDICATION
OPERATING INSTRUCTIONS
WELDING TIME ADJUSTMENT
1. Adjust the welding time if the strapping melts too much
or the band does not hold.
2. To do this, turn the right control clockwise to increase
the welding time.
ADJUSTMENT OF THE TENSIONING FORCE
1. Adjust the tensioning force if the strapping is too
loose or too taut.
2. To do this, turn the left control clockwise to increase
the tensioning force.
Start with a low welding time and a low tension force and slowly approach the desired result to avoid damage to the
fabric and injury from tearing straps.
Welding time
Tensioning force
