32
Clean detergent drawer and grooves
1.Press down the arrow location on softener cover inside the drawer.
2.Lift the clip up and take out softener cover and wash all grooves with
water.
3.Restore the softener cover and push the drawer into position.
Clean inlet filter
Inlet filter shall must be cleaned if there is not any or insufficient water
in when the tap is opened.
-Clean the tap filter:
1.Close the tap.
2.Select any procedure except “Wash” or “Drain” procedure.
3.Press the button “Start/Pause” and keep the procedure running for
about 40 seconds.
4.Remove the inlet pipe from the tap.
5.Use water to wash the filter.
6.Reconnect the inlet pipe.
-Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside of the machine.
2.Pull out the filter with long nose pliers and reinstall it back after being
washed.
3.Reconnect the inlet pipe.
4.Open the tap and make sure there is no water leakage.
5.Close the tap.
Notes: Generally, the tap filter is washed first and then the filter in washing machine will be
washed. If only the filter in washing machine is washed, then the steps 1~3 in cleaning the tap
filter shall be repeated.
WARNING!
Pull out the power plug to avoid electrical shock before washing.
After using the washing machine, pull out the power cord and close the door tightly to avoid
pinching the kids.
Remove foreign matters
-Drain Pump Filter:
Drain pump filter can filter the yarns and small foreign matters from the washings.
Clean the filter periodically to ensure the normal operation of washing machine.
Warning!
First, drain the water with drain pump and then open the drain pump to clean away foreign
matters from drain pump filter. Take care if the drained water is hot.
Cleaning the pump
Important!
According to the soil level within the cycles and the frequency of the cycles, you have to inspect
and clean the filter regularly.
