5
ENG
7
REVERSE DOOR
Tools required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the
door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It’s better that 2 people handle the unit during assembly.
Unscrew and remove the
hinge cover.
Unscrew and remove the
hinge.
Refit the bracket fitting
the bottom hinge pin.
Replace both adjustable
feet. Transfer the lower
door to the property
position.
Unscrew bottom hinge.
Then remove the
adjustable feet from both
sides.
Unscrew middle hinge.
Than lift lower door and
place it on a sort pad to
avoid scratching.
Move the hinge hole
covers from left side to
right side.
2
5
3
4
1
Unscrew and remove the bottom hinge pin, turn the bracket over
and replace it.
6
screw
unscrew
8
Reverse the middle
hinge by 180o , then
transfer it to the left
side position. Make the
middle hinge pin in the
upper hole of the lower
door, then tighten the
bolts.
