Touchpad for Android
Battery Installation
The X500-V2 wireless keyboard uses two AAA batteries (not included). Open the
battery compartment cover, take out the Nano receiver. Install the batteries into
the compartment, and make sure the polarity of the batteries is correct. The
positive (+) and negative (-) ends of each battery must match the positive (+) and
negative (-) markings in the battery housing.
LED Indicator
Num Indicator: Press "FN" +"F11", LED will turn blue. Press "FN"
+"F11" again, LED will turn off.
Caps Lock Indicator: Press "Caps Lock" key, LED will turn blue. Press
again, LED will turn off.
Power Indictor: LED will show red color then turns off when the keyboard turns
on.LED will turn red and flash if the battery is lower than 2.1V.
4
