● Use the ON/OFF switch, to switch on or switch off the appliance.
● The appliance can be used for +/- 60 minutes if the battery is fully charged.
● The appliance can be used directly with adapter if needed or if no power of
battery.
Using the comb attachment
● When load and unload the comb attachment, please ensure the power switch
to “0” position.
● Put the comb (long and sharp ends) into slots of clipper at the sides.
● Push the end of the comb to adjust the length (push up for long cut & down for
shorter cut).
Note : There are 9 positions to control the cutting length.
(4/5.5/7/8.5/10/11.5/13/14.5/16)
CLEANING AND MAINTENANCE
Before cleaning, Always : switch off the appliance, disconnect the apparatus and
let it cool.
Clean the outside of the apparatus with a sponge or slightly wet linen.
The parts (removable) in contact with food like plate, bowl, forks, Spatula etc. can
be washed in hot water with sponge and soft detergent or put in the dishwasher.
Never plunge the apparatus in water or all other liquid!
Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
●
Take off the comb, remove the blade-set (Fig 5a) clean the hair between the
top-blade and lower blade with brush.
●
The blade-set should be oiled frequently in order to maintain its good cutting
performance and thus ensure a long service life (Fig 6)
●
To replace the blade-set position it with the hook in the slot on the housing
and
press until it clicks into place (Fig 5b).
STORAGE
-Ensure the unit is completely cool and dry.
-Do not wrap the cord around the appliance, as this will cause damage.
-Keep the appliance in a cool, dry place and out of reach from children.
10
Summary of Contents for TTS-88
Page 1: ...CORDLESS CLIPPER INSTRUCTION MANUAL 1 ...
Page 5: ...5 ...
