background image

Before first use, remove the device and all accessories and being careful with 
sharp accessories. 
• Clean the apparatus according to the instructions in "Cleaning and maintenance" 
paragraph. 
• Place the machine on a suitable flat, stable surface. 

 

 

ANY QUESTIONS REGARDING THE START OR PERFORMANCE  
OF THE FOOD PROCESSOR,  
CALL THE FOLLOWING PHONE NUMBER :  

01 48 93 93 10 (call with no surcharge). 

 
 

Before placing the bowl, check that the device is disconnected and the gear 
selector is in "0" position. 
IF THE APPLIANCE DOES NOT START, IT IS NOT NECESSARILY FAILED, 
MAY BE, ONE OF THE ELEMENTS MAY NOT BE PROPERLY IN PLACE OR 
LOCKED. 

 

USE 

 

● Unroll the power cord completely.  
● Check that the tension in force in the country where you are, corresponds to 

that indicated on the apparatus.  

● Connect the apparatus in a correct socket-outlet, (and connected to the ground 

if the unit is Class I), to avoid any danger.  

● Disconnect the power source cable before any operation of cleaning of 

maintenance and accessories assembly. 

● Never modify the appliance in anyway. 
● Never exceed the maximum quantities below. 
● Never pour liquids hotter than 75°C into the bowl. 
● Follow the instructions given below, every time you use it. 
● Never leave the appliance unattended while it is on. 
● Never make the appliance work while it is empty. 
● Never touch the moving parts. 
● Never put your fingers or utensils inside the lid opening. 

 

Summary of Contents for TRO-1050















Reviews: