background image

Never place it into the dishwasher. 

Never use the appliance near hot surfaces.  

Do not operate the appliance with a damaged cord or plug, or after the appliance 
has been damaged in any manner.  

If the supply cord or appliance is damaged,  

it must be replaced by the manufacturer or its service agent or a similarly qualified 
person in order to avoid a hazard. 

Disconnect the power source cable before any operation of cleaning of 
maintenance and accessories assembly. 

Never use the appliance outside and always place it in a dry environment. 

Never use accessories, which are not recommended by the producer.  They could 
constitute a danger to the user and risk to damage the appliance.  

Never use any other connector than the one provided. 

Never move the appliance by pulling the cord. Make sure the cord cannot get 
caught in any way.   

Never wind the cord around the appliance and do not bend it 

Ensure that the power cord does not come into contact with hot parts of this unit. 

Make sure the appliance has cooled down before cleaning and storing it.  

The temperature of accessible surfaces may be very high when the appliance is 
operating. Never touch these parts, of apparatus, to avoid burning itself.

 

 

Make sure the appliance never comes into contact with flammable materials, such 
as curtains, cloth, etc...& the power cord and plug do not come in contact with 
water.  

Before cleaning, always unplug the appliance from the power supply and let it cool 
down.  

This appliance is not intended to be operated by means of an external timer or 
separate remote-control system. 

Always place the unit on a flat surface. Ensure, also, not to cover the device and 
not to put anything on it. 

Always remove the plug from the wall socket when the appliance is not in use. 

When using an extension lead always make sure that the entire cable is unwound 
from the reel. Use solely CE approved extension leads. Input power must be at 
least 16A, 250V, 3000W. 

Incorrect operation and improper use can damage the appliance and cause injury 
to the user. 

This device, designed for home use, complies with standards relating to this type 
of product.

 

 

The appliance must be used and rested on a table or flat & stable surface. 

The item must not be left unattended when it is connected to main supply. 

 

Summary of Contents for TFB-024











Reviews: