Note : It is recommended not to point the steam diffuser at metal accessories.
Hold down the steam button. Vibrations will be felt and a slight humming noise will be
emitted during the production of steam.
Gently press the fabric brush against the garment, moving the arm up and down,
targeting the folds of the fabric.
To stop steam production, release the steam button.
Notes : For good results, make sure the fabric is taut during steam production.
The steamer generates high steam temperatures, never touch the steam
diffuser. Risk of burns.
When using the steamer without the brush, keep a distance of, at least,
5 cm between the steam diffuser and the garment.
Never use the appliance with the steam facing you and in an upright
position.
Steam iron the curtains
1. Wash and dry the curtains as directed, depending on the type of fabric.
2. Hang the curtains in their place and spray them with the steam diffuser when
they are in place.
3. Pull the curtain slightly with one hand during steaming to help remove folds more
easily.
PRECAUTIONS
• If the garment has metal accessories, be careful and do not use the steamer
directly on the metal. It may discolour the metal.
• Always unplug the steamer and wait for it to cool before attaching or removing the
brush.
• Use only the accessories supplied.
• If the appliance becomes noisy, with a loud hum and no steam is generated, check
the water level in the tank. This may indicate that the steam tank is running out of
water and needs to be filled.
• Never use the steamer directly on the body, or animals.
• Never wear clothes while spraying them.
After each use
Press the On / Off button and unplug the device.
Take the water tank out of the appliance and empty the remaining water into a sink.
Always allow the steamer to cool down, in an upright position, before putting it away.
GENERAL INSTRUCTIONS
9
