9
2. To aspirate liquids,
Do not install a paper dust bag.
Use the foam filter provided for this purpose.
Insert it on the suction nozzle of the motor
unit. (1)
Insert the assembly by placing the motor
unit on the container. (2) (Fig. 5)
Attach the suction hose to the can (1)
by turning it clockwise until it clicks into
place (2). (Fig. 6)
Attach the suction tube (1) to the hose.
Select the accessory to be used (Brush,
Nozzle) (2) and attach it to the other end of the
suction hose (Fig. 7)
USE
•
Unwind the power cord completely.
• Check that the voltage in the country where you are
, corresponds to the voltage
indicated on the device.
• Connect the appliance to a good electrical outlet, (earthed if the appliance is
class I), to avoid any danger.
•
Disconnect the power cable from the power supply before performing any
maintenance cleaning and accessory fitting.
• Never modify the device.
To start the device, press the On / Off button. (1)
To stop it, press the On / Off button again.
