8
Check that the tension in force in the country where you are corresponds to
that indicated on the apparatus.
Connect the apparatus in a correct socket-outlet, (and connected to the
ground if the unit is Class I), to avoid any danger.
Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
Never modify the appliance in anyway.
VACUUMINQ FLOORS AND CARPETS
Unwind the cable from its support.
Plug the unit into a wall outlet.
Start the device by pressing the On / Off button.
Note: after several uses, it is advisable to regularly check the state of cleanliness
of the brush, in order to avoid scratching sensitive surfaces.
VACUUMING FURNITURE CAR SEATS …
Remove the hand-held vacuum from its holder by pressing the release button.
Also release the floor brush (button N° 6)
Use the vacuum cleaner freely. After use, put it back on its support.
EMPTYING AND CLEANING THE DUST BIN
1. Remove the hand-held vacuum from its
holder by pressing the release button.
2. Remove the set: dust container and filter,
by pressing the release button.
3. Remove the filter and empty the contents
of the dust container into a bin.
The filter can be shaken or cleaned with
soapy water and rinsed with warm water.
(Make sure the parts are dry before
assembly.
4. Reinstall the filter and then the dust container in its
housing.
STORAGE
-Ensure the unit is completely cool and dry.
-Do not wrap the cord around the appliance, as this will cause damage.
-Keep the appliance in a cool, dry place and out of reach from children.
