Presetting the radio stations
12
11
Press POWER to turn on the unit.
2
2
Press TUNER/BAND until the FM or AM appears
in the display window.
3
3
And then every time you press TUNER/BAND,
FM and AM changes alternately.
4
4
Press TUNING DOWN/UP on the front panel until
the frequency indication starts to change, then
release.
Scanning stops when the unit tunes in a station.
5
5
Press PROG./MEMO on the front panel.
A preset number will flash in the display window.
6
6
Press PRESET DOWN/UP on the front panel or
PRESET (
) on the remote control to select
the preset number you want.
77
Press PROG./MEMO on the front panel again.
-
The station is stored.
8
8
Repeat steps 4 to 7 to store other stations.
To tune in a station with a weak signal
Turn
MULTI JOG DUAL CONTROL
in step 4 to tune in
the station manually.
To clear all the memorized stations
Press and hold
PROG./MEMO
on the front panel for
about two seconds, “CLEAR” appears in the display win-
dow and then press
CLEAR
again, the stations are
cleared.
For your reference
If all stations have already been entered, FULL message
will appear in the display window for a moment and then
a preset number will flash. To change the preset number,
follow the steps 6-7 on the left side.
To recall presets
Press and hold
PRESET DOWN/UP
on the front panel or
PRESET (
)
on the remote control until the desired
preset number appears or press it repeatedly.
Tuning in automatically
Press
TUNING DOWN/UP
.
Tuning in manually
Turn
MULTI JOG DUAL CONTROL.
You can preset 30 stations for FM and AM. Before tuning, make sure that you have turned down the volume to the
minimum.
TAPE-A
TAPE-B
TAPE-A
TAPE-B
X
TAPE-A
APE-A
TAPE-B
APE-B
TUNER/
BAND
MULTI JOG
DUAL CONTROL
TUNING DOWN/UP
TUNER/
BAND
CLEAR/SET/
STOP(
)
PRESET DOWN/UP
PRESET (
)
PROG./MEMO
POWER
