11
BEFORE OPERA
TION
Audio Adjustment
Volume Adjustment
• Turn
VOLUME DOWN/UP knob
clockwise to increase
the sound level, or counterclockwise to decrease it.
• Press
VOLUME CONTROL (
)
to increase the
sound level, or press the
VOLUME CONTROL (
)
to
decrease it on the remote control.
Sound Quality Adjustment
• To activate stereo sound
- You can choose between 6 fixed sound impressions.
Select a desired sound mode by using
EQUALIZER
PATTERN
buttons on the front panel or
EQ PATT.
button on the remote control.
- Each you press the button the indication changes as
follows.
FLAT
→
ROCK
→
POP
↑
JAZZ
←
CLASSIC
←
VOCAL
• Headphone Jack
Connect a stereo headphone plug ( 6.3mm) into the
headphone jack.
The speakers are automatically disconnected when
you plug in the headphones (not supplied).
MUTE
Press
MUTE
on the remote control to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, “MUTE” indicator flashes in the display
window.
SURROUND
To activate surround mode
• You can choose between 7 fixed sound impressions.
• Select a desired surround mode by using the
SURROUND
(SURR.)
button on the front panel or on the remote control.
• Each you press the button the indication changes
as follows.
SURROUND OFF
→
SIMULATED LOW
→
SIMULATED HIGH
↑
MOVIE HIGH
←
MOVIE LOW
←
MUSIC HIGH
←
MUSIC LOW
DISPLAY MODE
Whenever you press
DISPLAY MODE (DISP.MODE)
on
the front panel or on the remote control , you can enjoy
the spectrum change with 6 types in the display.
XDSS (Extreme Dynamic Sound System)
- Press
XDSS
to reinforce treble, bass and surround
effect.
- Each you press the button the indication changes as
follows.
XDSS OFF
→
XDSS 1 ON
→
XDSS 2 ON
UBB/HI-TONE
Press
UBB/HI-TONE
button to select bass or treble.
- Each you press the button the indication changes as
follows.
UBB ON
→
UBB OFF
↑
HITONE OFF
←
HITONE ON
DEMO
Press
DEMO
in power on/off state to demonstrate the
function in the display window.
To cancel it, press
POWER
or
DEMO
again. During
demonstration in power-on status you can cancel it
by using the other buttons.
DIMMER
This function is darken the display window by half in
power-on status. Press
DIMMER
on the remote control
once, and the display is darken, and if you press it once
more, the display will darken by half too. To cancel it
press the button again.
