16
Programming Tracks with Remote
Control
Random Play
You may program up to 32 tracks for playback in any desired
order. This function only operates with audio CDs (not DVDs).
N
N
N
No
oo
otttteeee::: Select the disc that you want to program then
press play to start playback and follow the procedures
below to start programming.
1. Press
STOP
twice.
2. Press and
PROGRAM
01- -
After the first program track has been entered
appears.
P-OFF
appears.
3. Press
to select
the desired CD (if necessary).
The CD number appears to the far right of the display.
4. Use the number keypad to enter the desired track number,
then press
ENTER
to program the first desired track.
5. Repeat Steps 3–4 to program more tracks.
6. Once you have completed programming, press
or to start your
program playback.
To check the programmed order, press
STOP
twice.
press
or
to view the programmed order.
To clear the programming, press
STOP
twice, then press
CLEAR
.
If you try to select more than 32 tracks,
FULL
appears in the
display. You cannot program any more tracks.
If you press
PROGRAM
twice successively while
programming, the programming stops and
appears.
Press
RANDOM
. The unit randomly selects tracks.
N
N
N
No
oo
otttteeee:::: Pressing
RANDOM
also clears any existing programming.
PRESET
P R E S E T
DISC 1
,
DISC 2
DISC 3
DIS C 1
DIS C 2
, and
DIS C 3
Using GUI to Set a CD to Repeat Play
1. Turn on the TV and switch it to the video input source you
have selected for your DVR99 receiver.
2. Using the DVR99 remote control, press the DVD/CD fun-
ction button.
3. Insert a CD into one of the three DVD/CD trays on the
DVR99 receiver and press the play button for the tray you
have put the CD in.
4. Press REPEAT on the remote control during CD playback.
The TV screen displays the repeat mode setting.
5. The repeat mode changes between REPEAT ONE (repeat
one track only), REPEAT ALL (repeats all tracks on the
selected disc), REPEAT ALL DISC’S (repeats all disc’s
loaded in trays) AND REPEAT OFF (turns repeat play
off) as you press the REPEAT button.
02- -
NOTES:
Repeatedly
Modifying the Program and Adding
a Track
1. While in the program mode, repeatedly press or to
select the programmed position (1 through 32) that you
wish to change.
2. To change the selected programmed position to another
track, use the remote’s number keypad. Enter the desired
track number and press the
ENTER
button.
3. To change the selected programmed position to a track on
another disc, press the
PRESET
and select the
desired
.
Then, using
the remote’s keypad, enter the number of the desired
track on this disc and press the
ENTER
button.
4. To clear a selected programmed position, press the
CLEAR
button on the remote control. By clearing a position, all
tracks with a position number higher than the cleared
position will be moved down by one position number.
Note: The programmed contents are LOST if:
a. You change functions on the receiver.
b. You open the tray of the disc playing.
c. You turn the power off.
