TechVision DVR-LT016480, User Manual

Page: 51 / 140

When you click stop button during the burning process, there are two conditions
er device, the stop function becomes activated immediately and
 ackup the data before you click stop button. For
he H+M+S.
OM
4.8 PTZ Control and Color Setup
on PELCOD protocol. For other protocols,
4.8.1 Cable Connection
res below to go on cable connection
put port.
video should be in the current screen. Before setup, please
ecoder address setup is right.
Tilt Control button. The
uch as PELCOD)
baud rate. Default value is 9600.
one.
for different devices:
 For CD/DVD burn
there is no data in the burner.
For USB device, system can b
example, if there is a file of 10 minutes, when you click stop after five minutes
backup, system only save the previous 5-minute data in the device.
T file name format usually is: SN_CH+channel time Y+M+D+
In the file name, the YDM format is the same as you set in general interface.
(Main Menu ->Setting ->General).You can visit our website to view listed CD-R
type.
Note:
All the operations here are based
there might be a little difference.
Please follow the procedu
 Connect the dome RS485 port to DVR 485 port.
 Connect dome video output cable to DVR video in
 Connect power adapter to the dome.
4.8.2 PTZ Setup
Note:
The camera
check the following connections are right:
 PTZ and decoder connection is right. D
 Decoder A (B) line connects with DVR A (B) line.
Boot up the DVR, input user name and password.
In the main menu, click setting, and then click Pan/
interface is shown as in Figure 4-28. Here you can set the following items:
 Channel: select the current camera channel.
 Protocol: select corresponding PTZ protocol(s
 Address: default address is 1.
 Baud rate: select corresponding
 Data bits: select corresponding data bits. Default value is 8.
 Stop bits: select corresponding stop bits. Default value is 1.
Parity: there are three options: odd/even/none. Default setup is n
51