7
Chapter 3
Installing the VP-II Controller
Install the Controller on the inner wall, near enough to the VP-II
Scanner that it can be reached with the cables provided. The
Controller cable length should not exceed 4m. Select a place where
access for maintenance is convenient. Ensure that a power outlet is
near.
Make a hole in the wall for affixing the controller; then insert a screw
approximately two thirds of the way in. Fix the controller on the wall
by hooking it on the screw.
Connect the power cable and the controller cable. Ensure that the
connection cable is not exposed to the outside.
Screw type : 3
Φ×
×
×
×
20mm
SMPS
DIP S/W
VP-II Scanner
Door Lock
