TSR2900-10 Hardware Installation Manual
- 5
1) When the lifetime of our products ends, handle them according to national laws and
regulations, or send these products to our company for collective processing.
2.2 Safety Advice
Safety Principles
Keep dustless and clean during or after the installation.
Put the cover at the safe place.
Put tools at the right place where they are not easily falling down.
Put on relatively tight clothes fasten the tie or scarf well and roll up the sleeve, v avoiding
stumbling the machine box.
Put on the protective glasses if the environment may cause damage to your eyes.
Avoid incorrect operations that may cause damage to human or devices.
Safety Notices
The safety notices mentioned here means that improper operation may lead to
body damage.
Read the installation guide carefully before you operate the system
Only
professionals are allowed to install or replace the router.
Pull out the AC power socket and close the direct-current power before operating
on the machine box or working beside the power source.
The final configuration of products must comply with relative national laws and
regulations.
Safety Principles for Live Working
Put off ornaments, such as ring, necklace, watch and bracelet, before you
operate under live working. When metal articles connect the power to the
ground, short circuit happens and components may be damaged.
Pull out the AC power socket and close the direct-current power before
operating on the machine box or working beside the power source.
When the power is on, do not touch the power.
Correctly connect the device and the power socket.
Only professionals are allowed to operate and maintain the device.
Read the installation guide carefully before the system is powered on.
Note
：
1) Check potential dangers, such as the humid floor, ungrounded extensible power line and
tatty power line.
2) Install the emergent on-off at the working room for turning off the power when trouble
happens.
3) Turn off the power on-off of the router and plug off the power line before installing or
uninstalling the machine box or working beside the power.
