![background image](http://html1.mh-extra.com/html/techroutes/s3740f/s3740f_hardware-installation-manual_1070866009.webp)
S3740F Hardware Installation Manual
- 5 -
Chapter 2 Installation Preparation
2.1 Caution of Usage
Similar to other electronic products, the semiconductor chip easily gets damaged if you
power on or off abruptly and frequently. To restart up the switch of
S3740F
, you have to open
the power on-off after the power is cut down for three to five seconds.
Avoid severe collision or falling down from the height to protect the parts in the switch.
Use correct outside ports to connect the switch of
S3740F
. Do not put the Ethernet plug into
the console port (RJ45 8-line socket). Similarly, do not put the console cable into the console
port (RJ45 8-line socket).
Note:
1)
When you plug or dial the power line, keep the power line horizontal with the power
socket.
2)
When the lifetime of our products ends, handle them according to national laws and
regulations, or send these products to our company for collective processing.
1.2 Safety Advice
2.2.1 Safety Principles
Keep dustless and clean during or after the installation.
Put the cover at the safe place.
Put tools at the right place where they are not easily falling down.
Put on relatively tight clothes, fasten the tie or scarf well and roll up the sleeve, avoiding
stumbling the machine box.
Put on the protective glasses if the environment may cause damage to your eyes.
Avoid incorrect operations that may cause damage to human or devices.
2.2.2 Safety Notices
The safety notices mentioned here means that improper operation may lead to body damage.
Read the installation guide carefully before you operate the system.
Only professionals are allowed to install or replace the switch.
Pull out the AC power socket and close the direct-current power before operating on
the machine box or working beside the power source.