12
-
IF NOT REQUIRED: PRESS
MODE
BUTTON ON THE UNIT OR REMOTE CONTROL BEFORE USB/SD
RECORDING, DISPLAY WILL SHOW “T-OF”, WHICH MEANS AUTO SPLIT HAS BEEN DEACTIVATED.
-
PLEASE NOTE FOR AUTO SPLIT: SEVERAL SECONDS OF THE BEGINNING OF THE NEXT TRACK MAY
NOT BE RECORDED, AS THE UNIT MAY TAKE A FEW SECONDS TO CREATE A NEW FILE ON THE USB/SD;
AND IT CAN ADDITIONALLY BE THE CASE THAT SOME MUSIC PRODUCERS INTENTIONALLY ADD SILENT
SECTIONS WITHIN ONE TRACK. AS A RESULT, THIS WILL VERY LIKELY MAKE THE UNIT CONSIDER THIS
SILENT PART THE BREAK BETWEEN TRACKS AND CREATE A NEW TRACK ON THE RECORDING.
-
NOTE FOR AUTO SPLIT: DURING USB/SD RECORDING FROM TURNTABLE & CASSETTE, WHEN THE
UNIT HAS DETECTED ANY PARTICULAR SILENT PART, THE TURNTABLE AND CASSETTE PLAYER WILL STOP
MOMENTARILY. THE TURNTABLE AND CASSETTE PLAYER WILL RESUME OPERATION ONCE THE USB/SD
DEVICE HAS BEGUN CREATING A NEW FILE TO BE RECORDED.
BLUETOOTOOTH CONNECTION
-
PRESS AND HOLD
FUNCTION
BUTTON TILL LCD SHOWS “BT”, THEN THE UNIT IS READY
FOR CONNECTION WITH YOUR BLUETOOH DEVICE (SUCH AS MOBILE PHONE).
-
SWITCH ON THE BLUETOOTH FUNCTION OF YOUR BLUETOOH DEVICE, AND SELECT
“ODCK110 WD” BLUETOOTH EQUIPMENT FOR CONNECTION.
-
AFTER YOUR BLUETOOH DEVICE IS CONNECTED WITH THE UNIT VIA BLUETOOTH, START
TO PLAYBACK YOUR DEVICE.
-
THIS UNIT HAS NFC FUNCTION WHICH CAN ALLOW YOUR BLUETOOH DEVICE (SUCH AS
MOBILE PHONE) CONNECTING WITH THE UNIT AUTOMATICALLY.
SWITCH ON THE BLUETOOTH AND NFC FUNCTION OF YOUR DEVICE, THEN PUT IT
NEAR THE “BT/N” LOGO WITHIN 5MM ON THE FRONT PANEL. YOUR DEVICE CAN
AUTOMATICALLY SEACH AND CONNECT WITH THE UNIT.
TO DISCONNECT WITH THE UNIT, PUT YOUR DEVICE NEAR THE “BT/N” LOGO WITHIN
5MM ON THE FRONT PANEL AGAIN.
EARPHONE JACK & LINE OUT SOCKET
-
THIS SYSTEM CAN BE CONNECTED WITH HEADPHONE OR EXTERNAL AMPLIFIER /
SPEAKER BY 3.5MM
EARPHONE JACK
.
-
THIS SYSTEM CAN BE CONNECTED WITH EXTERNAL DEVICE (EG. AMPLIFIER AND
SPEAKER) BY
LINE-OUT SOCKET
AT REAR CABINET.
MICROPHONE JACK
-
THIS SYSTEM CAN BE CONNECTED WITH 6.3MM MICROPHONE FOR KARAOK FUNCTION.
-
MICROPHONE CAN BE CONNECTED WITH
MICROPHONE JACK 1
AND
MICROPHONE JACK 2
.
-
MICROPHONE VOLUME CONTROL
TO CONTROL MICROPHONE VOLUME;
MICROPHONE ECHO
CONTROL
FOR CONTROL MICROPHONE ECHO LEVEL.
POWER SAVING FEATURE:
To save energy, if there is no audio signal from CD / Turntable / Cassette / AUX IN / USB / SD for a period of over 10
minutes, then the unit will automatically switch to Standby Mode.
