11
FOLDER SEARCHING
PRESS
ALBUM DOWN
OR
ALBUM UP
TO SEARCH FOLDER BACKWARD OR FORWARD.
REPEAT FUNCTION
DURING AUDIO PLAYBACK, PRESS
MODE
BUTTON ONCE, SINGLE TRACK WILL BE PLAYED
REPEATEDLY. PRESS
MODE
BUTTON AGAIN, IT WILL REPEATEDLY PLAY ALL TRACKS IN THE WHOLE
CD.
TRACKS PROGRAMMING
UP TO 60 MP3 TRACKS & 30 CD AUDIO FORMAT TRACK CAN BE PROGRAMMED AND PLAYED IN ANY ORDER.
BEFORE USE, BE SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:
1. PRESS
FUNCTON
BUTTON TO “CD” AND AT STOP MODE
2.PRESS THE
MODE
BUTTON, “MEM” WILL BE FLASHING ON LCD DISPLAY. MOREOVER, IT WILL INDICATE
PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.
3.SELECT A DESIRED TRACK BY PRESSING
SKIP UP
OR
SKIP DOWN
BUTTON. FOR
MP3/WMA DISC,
PRESSING
ALBUM DOWN
OR
ALBUM UP
TO SEARCH FOLDER BACKWARD OR
FORWARD.
4.PRESS THE
MODE
BUTTON TO STORE THE TRACK INTO MEMORY.
5.REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6.WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS
PLAY/PAUSE
BUTTON
TO
PLAY THE TRACKS IN ASSIGNED ORDER.
7. PRESS
STOP
BUTTON
TO STOP PLAYING OF PROGRAMMED TRACKES, PRESS
STOP
BUTTON
AGAIN TO
CANCEL PROGRAMMING.
COPYING OF CD
THE SYSTEM ALLOWS YOU TO COPY THE TRACK FROM CD TO USB OR SD BY 1 TRACK, 1 FOLDER OR ALL
FILES.
I) COPY 1 TRACK
1.INSERT THE USB STORAGE MEDIA OR SD/MMC CARD, PRESS
FUNCTON
BUTTON TO “CD” MODE.
2.PRESS
REC
BUTTON DURING THE PLAYBACK OF THE COPYING TRACK FROM CD, THEN “ONE” WILL BE
FLASHING ON THE DISPLAY. PRESS
REC
BUTTON AGAIN TO CONFIRM.
3.THE USB OR SD ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW.
4.AFTER COMPLETING OF COPY, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
5.DISPLAY WILL SHOW “END” AND BACK TO CD MODE.
II) COPY 1 FOLDER (FOR MP3/WMA DISC ONLY)
1.INSERT THE USB STORAGE MEDIA OR SD/MMC CARD, SET IN CD & STOP MODE AFTER UNIT READING.
2. PRESS
ALBUM DOWN
OR
ALBUM UP
TO SEARCH FOLDER FOR COPYING.
3. PRESS
REC
BUTTON, THEN “ONE” WILL BE FLASHING ON THE DISPLAY. PRESS
SKIP UP
/
SKIP
DOWN
BUTTON TO SELECT “DIR” ON THE DISPLAY. PRESS
REC
BUTTON AGAIN TO CONFIRM.
4. USB OR SD ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW.
5. WHEN THE USB OR SD ICON STOPS FLASHING, IT MEANS THAT THE FOLDER COPYING IS COMPLETED.
III) COPY ALL TRACK
1.INSERT THE USB STORAGE MEDIA OR SD/MMC CARD, PRESS
FUNCTON
BUTTON TO “CD” MODE.
2. PRESS
REC
BUTTON, THEN “ONE” WLL BE FLASHING ON THE DISPLAY. PRESS
SKIP UP
/
SKIP DOWN
BUTTON TO SELECT “ALL” ON THE DISPLAY. PRESS
REC
BUTTON AGAIN TO CONFIRM.
4. USB OR SD ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW.
5. WHEN THE USB OR SD ICON STOPS FLASHING, IT MEANS THAT ALL TRACK COPYING IS COMPLETED.
SPLIT TRACK FUNCTION FOR USB/SD RECORDING FOR TURNTABLE/CASSETTE/AUX IN
1) MANUAL SPLIT OPERATION PROCEDURE:
DURING USB/SD RECORDING, THE USB/SD ICON WILL
FLASH ON THE DISPLAY. IF A NEW TRACK IS REQUIRED, PRESS
MODE
BUTTON ON THE UNIT OR REMOTE
CONTROL, DISPLAY WILL SHOW “TS”, THEN THE UNIT WILL STOP RECORDING MOMENTARILY AND RESUME
AGAIN. A NEW FILE WILL HAVE BEEN CREATED ON THE USB/SD DEVICE REPRESNTING A NEW TRACK.
2) AUTO SPLIT OPERATION PROCEDURE:
- BEFORE USB/SD RECORDING, PRESS
FUNCT
BUTTON TO SELECT AUDIO SOURCE, THEN PRESS
MODE
BUTTON ON THE UNIT OR REMOTE CONTROL, DISPLAY WILL SHOW “T-ON”, WHICH MEANS THE
AUTO SPLIT FUNCTION HAS ACTIVATED. THEN START USB/SD RECORDING, THE UNIT CAN AUTOMATICALLY
DETECT THE SILENT PART BETWEEN EACH TRACK, AND CREATE A NEW FILE TO MOVE ON TO START
RECORDING THE NEXT TRACK.
