DLG-1000
DLG-1000
13.Glue the aileron servo
14.Seal the routing place with transparent
tape.
15.Aileron pushrod
16.Connect the servo to aileron pushrod
and fixed with screw by screwdriver.
17.Aileron connection as picture.
18.Cross the aileron servo into the routing
hole of fuselage.
19.Wing fixed screw
20.Tighten the screw by screwdriver after
wing installed
21.Y Harness
22.Connect the aileron servo wire to
Y harness
23.Receiver
24.Insert all servo wires into the receiver
25.3A UBEC
26.Connect the receiver to the UBEC
27.Place in order after the equipment
connection
Summary of Contents for DLG-1000
Page 1: ......
Page 8: ...DLG 1000 DLG 1000 ...
